Support
If you know the name of the product you need support for, you can use the search bar below. Alternatively you can browse by wireless protocol. If you cannot find what you are looking for, then just reach out to us and we will help you.
W-Modbus development kit
Back to product pageDesign files
file
W-Modbus/BACnet OEM module Mechanical design files
type
date
size
action
file
W-Modbus/BACnet OEM module Orcad design files
type
date
size
action
file
W-Modbus/BACnet OEM module Altium design files
type
date
size
action
Documents
file
Firmware Update Instructions
How to update the firmware of your device using BLE and your smart phone
type
date
size
action
Firmware
Didn’t find what you are looking for?
FAQ
Activate bluetooth on the LumenRadio W-BACnet or W-Modbus device by pressing the button three times. The device will confirm by flashing the mid LED blue twice. Bluetooth will be active for 1 min.
You press the button three times. The Device will confirm by flashing the mid led blue twice. The Bluetooth beacon will be active for one minute.
The first time you see this is when you updated to 3.0.0 or above. This is the new FOTA behavior indicating that the node is comparing it's firmware with the gateway. Once the node have received the latest gateway firmware it will indicate green every 5 second on the mid LED. You will also see the nodes switch from green to yellow if you are doing a new firmware upgrade from 3.0.0 to a higher version on the gateway. This indicates that FOTA is in progress. Once the node have received the firmware it will indicate green again. The network will reboot when all nodes are green or after 2h what ever occurs first.
