AirGlow
Wireless Mesh outdoor lighting controller.
AirGlow combines advanced technology for superior range and reliability with easy commissioning using Bluetooth + App and offers a “connectivity-out-of-the-box” solution not seen before in the outdoor lighting control segment. AirGlow is DALI 2 and D4i certified with a Zhaga Book 18 connector.
SAVE ENERGY
Easily create an energy efficient light night dim settings with the AirGlow app.
SAFETY
Don’t compromise safety, AirGlow together with a DALI-2 movement sensor - right amount of light at the right time.
ONE TIME FEE
AirGlow doesn’t come with long term agreements or recurring fees, it’s a one time cost. Easy to buy and easy to install.
Cut energy cost without compromising street light safety.
AirGlow reduces power consumption at the same time it has an immediate effect on people’s sense of feeling safe.
Autonomous control can be programmed for advanced night dimming schemes with sensors reacting on any movement from the immediate surrounding, turning on the light to full illumination within a second. No movement, no lighting, no waste.
Easily calculated energy savings while not compromising safety and visibility. No subscription agreement. Just an upfront cost for AirGlow. Cities and municipalities can now provide illuminated environments only when it is needed - for stadiums, car parks, cycle paths, buildings and public parts. Easy made lighting control.
SUPERIOR RANGE
UNIQUE RELIABILITY
SMARTPHONE COMMISSIONING
RGBW & TUNABLE WHITE
- DALI-2 and D4i certified
- Zhaga book 18 compliant hardware
- Astronomical time triggering of scenes
- Time triggering of scenes
- Presence detection scene triggering through LSI interface and DALI-2/D4i sensors
- Use smartphone app to set up scenes and groups
- Up to 6ch DALI DT6, CW WW RGB A/W
- Sub second response time
- 5 year guarantee, parts only
Environmental:
- Temperature/Humidity
Operational: -40 to +65C / 10% to 90% non condensing
Storage: -40 to +85C / 10% to 90% non condensing - P65 rated
- IK09 high impact resistant
- UV protection/salt ingress, protected by enclosure
Electrical
- 24+/-6VDC input voltage
- 250mW nominal power consumption
- 27VDC max on DALI and LSI input pins
- All interfaces ESD protected
Dimensions
- 80mm diameter x 40mm height
Conformance
- CE/RED
Radio: EN300328 v2.2.2
EMC: EN 301 489-1, EN 301
489-3, EN 301 489-17
Electrical Safety: EN 62311, EN
62368-1+A11, EN 60950-22 - Environmental
IEC 60068-1, IEC 60068-2
Configuration data storage
- Highly secured storage in cloud
- System access controlled by system owner
- All data encrypted for privacy and security
MTTF (Mean Time To Failure)*
- >100000 hours
*MTTF verified through HALT/HASS testing
Can I delete a System or Zone?
No, an update is planned to allow the user to hide inactive systems. We don't want someone to delete a system by mistake..
Temperature, vibration, IP-rating and UV-resilience?
Temperature: -40C to +65C
Vibration: IEC 60068-2-6:2007
IP-Rating: IP65
UV-resilience: PC smoked glass with 76% light filtering
What is the recommended range between AirGlows?
LumenRadio recommends a maximum distance of 150m between any two AirGlows.
Do I need Wi-Fi connection?
The Bluetooth device needs to be connected to the Internet during the setup of the system, and during commissioning of each AirGlow. The AirGlow does not need a Wi-Fi connection to be programmed, any Bluetooth smartphone or tablet is possible.
One AirGlow in more than one system?
The AirGlow can only be used in one system at a time.
How can I setup a RGBW fixture?
Ensure that the luminaire is RGBW DALI DT6 by checking the luminaire manual. Make sure that your driver/-s have the right DALI Group addresses according to chapter “DALI configuration” in the user manual.
What happens if I drop the AirGlow?
AirGlow have been drop tested with good results but make sure to test the functionality before installing it on sight.
How do I program the luminaire?
Today you have to use a DALI interface to change settings on your luminaire/driver. In the near time AirGlow will be able to handle it via the app.
What is the system?
It is the same as a network. It could be a city centre e.g. with the Zones being different streets.
How do I add an AirGlow to the app?
- Create a System and Zone, in the Zone view click the “Find AirGlow in Range” button. If there are several AirGlows in range, you can select an AIrGlow from the list and click on “identification”. The selected AirGlow will flash 5 times.
How do I enter my details?
Start by creating an account, log in. Fill all necessary information under “My Account” and save details.
How do I download the app?
Download the AirGlow app from either AppStore or Google Play
Set-up and install devices and configure scenes with the AirGlow app
An essential installation and maintenance tool for the AirGlow wireless mesh outdoor lighting control system
